模板:Infobox connector
此模板使用Lua語言: |
Template:Infobox connector is an infobox for electrical and (audio/video) signal connectors of all kinds.
The template supports three images:
- image, logo, pinout_image
Image and logo share a 300 pixel wide area - so if both are used then the width of the image should be set to 150 pixels, that is, [[Image:example.jpg|150px]]. If only image and pinout are used, then the size of both should be 300 pixels.
Usage
{{Infobox connector
| name =
| logo =
| image =
| caption =
| type =
| designer =
| design_date =
| manufacturer =
| production_date =
| superseded =
| superseded_by =
| superseded_by_date =
| weight =
| length =
| width =
| height =
| diameter =
| num_pins =
| hotplug =
| daisy_chain =
| external =
| audio_signal =
| video_signal =
| cable =
| passband =
| physical_connector =
| electrical =
| earth =
| maximum_voltage =
| maximum_current =
| data_signal =
| data_bit_width =
| data_bandwidth =
| data_devices =
| data_style =
| pinout_image =
| pin1 =
| pin1_name =
| shell =
| hooks =
| pin_custom1 =
| pin_custom1_name =
| pinout_caption =
| pinout_image2 =
| pinout_caption2 =
| pinout_col1_name =
| pinout_col2_name =
| pin2_name =
| pin2 =
| pin3_name =
| pin3 =
| pin4_name =
| pin4 =
| pin5_name =
| pin5 =
| pin6_name =
| pin6 =
| pin7_name =
| pin7 =
| pin8_name =
| pin8 =
| pin9_name =
| pin9 =
| pin10_name =
| pin10 =
| pin11_name =
| pin11 =
| pin12_name =
| pin12 =
| pin13_name =
| pin13 =
| pin14_name =
| pin14 =
| pin15_name =
| pin15 =
| pin16_name =
| pin16 =
| pin17_name =
| pin17 =
| pin18_name =
| pin18 =
| pin19_name =
| pin19 =
| pin20_name =
| pin20 =
| pin21_name =
| pin21 =
| pin22_name =
| pin22 =
| pin23_name =
| pin23 =
| pin24_name =
| pin24 =
| pin25_name =
| pin25 =
| pin26_name =
| pin26 =
| pin27_name =
| pin27 =
| pin28_name =
| pin28 =
| pin29_name =
| pin29 =
| pin30_name =
| pin30 =
| pin31_name =
| pin31 =
| pin32_name =
| pin32 =
| pin33_name =
| pin33 =
| pin34_name =
| pin34 =
| pin35_name =
| pin35 =
| pin36_name =
| pin36 =
| pin37_name =
| pin37 =
| pin38_name =
| pin38 =
| pin39_name =
| pin39 =
| pin40_name =
| pin40 =
| pin_name_custom1 =
| pin_custom2_name =
| pin_name_custom2 =
| pin_custom2 =
| pin_custom3_name =
| pin_name_custom3 =
| pin_custom3 =
| pin_custom4_name =
| pin_name_custom4 =
| pin_custom4 =
| pin_custom5_name =
| pin_name_custom5 =
| pin_custom5 =
| pin_custom6_name =
| pin_name_custom6 =
| pin_custom6 =
| pin_custom7_name =
| pin_name_custom7 =
| pin_custom7 =
| pin_custom8_name =
| pin_name_custom8 =
| pin_custom8 =
| pinout_notes =
}}
| name =
| logo =
| image =
| caption =
| type =
| designer =
| design_date =
| manufacturer =
| production_date =
| superseded =
| superseded_by =
| superseded_by_date =
| weight =
| length =
| width =
| height =
| diameter =
| num_pins =
| hotplug =
| daisy_chain =
| external =
| audio_signal =
| video_signal =
| cable =
| passband =
| physical_connector =
| electrical =
| earth =
| maximum_voltage =
| maximum_current =
| data_signal =
| data_bit_width =
| data_bandwidth =
| data_devices =
| data_style =
| pinout_image =
| pin1 =
| pin1_name =
| shell =
| hooks =
| pin_custom1 =
| pin_custom1_name =
| pinout_caption =
| pinout_image2 =
| pinout_caption2 =
| pinout_col1_name =
| pinout_col2_name =
| pin2_name =
| pin2 =
| pin3_name =
| pin3 =
| pin4_name =
| pin4 =
| pin5_name =
| pin5 =
| pin6_name =
| pin6 =
| pin7_name =
| pin7 =
| pin8_name =
| pin8 =
| pin9_name =
| pin9 =
| pin10_name =
| pin10 =
| pin11_name =
| pin11 =
| pin12_name =
| pin12 =
| pin13_name =
| pin13 =
| pin14_name =
| pin14 =
| pin15_name =
| pin15 =
| pin16_name =
| pin16 =
| pin17_name =
| pin17 =
| pin18_name =
| pin18 =
| pin19_name =
| pin19 =
| pin20_name =
| pin20 =
| pin21_name =
| pin21 =
| pin22_name =
| pin22 =
| pin23_name =
| pin23 =
| pin24_name =
| pin24 =
| pin25_name =
| pin25 =
| pin26_name =
| pin26 =
| pin27_name =
| pin27 =
| pin28_name =
| pin28 =
| pin29_name =
| pin29 =
| pin30_name =
| pin30 =
| pin31_name =
| pin31 =
| pin32_name =
| pin32 =
| pin33_name =
| pin33 =
| pin34_name =
| pin34 =
| pin35_name =
| pin35 =
| pin36_name =
| pin36 =
| pin37_name =
| pin37 =
| pin38_name =
| pin38 =
| pin39_name =
| pin39 =
| pin40_name =
| pin40 =
| pin_name_custom1 =
| pin_custom2_name =
| pin_name_custom2 =
| pin_custom2 =
| pin_custom3_name =
| pin_name_custom3 =
| pin_custom3 =
| pin_custom4_name =
| pin_name_custom4 =
| pin_custom4 =
| pin_custom5_name =
| pin_name_custom5 =
| pin_custom5 =
| pin_custom6_name =
| pin_name_custom6 =
| pin_custom6 =
| pin_custom7_name =
| pin_name_custom7 =
| pin_custom7 =
| pin_custom8_name =
| pin_name_custom8 =
| pin_custom8 =
| pinout_notes =
}}
例子
類別 | Analogue video connector | ||
---|---|---|---|
產品歷史 | |||
設計者 | Some guy | ||
設計時間 | Early 1990s | ||
製造商 | Initially Toshiba | ||
製造時間 | Early 1990s to 2005 | ||
前身 | RF connector | ||
取代 | DVI connector (2005) | ||
一般規格 | |||
長度 | 36 mm (typical) | ||
寬度 | 25 mm | ||
高度 | 6.5 mm | ||
熱插拔 | Yes | ||
外接 | External | ||
音頻信號 | None | ||
視頻信號 | Analogue 480i, 480p, 720p, 1080i | ||
纜線 | 14 core shielded (25 m max) | ||
通帶 | 0–20 GHz | ||
引腳 | 14 (6 video, 3 reserved, 2 detect, 3 data) | ||
連接器 | DB-25 | ||
電力 | |||
信號 | 220 volts AC 50 Hz typically | ||
接地 | Dedicate pin | ||
最大電壓 | 450 volts peak | ||
最大電流 | 20 amps at 220 volts, 5 amps at 400 volts | ||
數據 | |||
數據信號 | Resolution and Aspect ratio only | ||
寬度 | 2 bits | ||
比特率 | 120 bit/s | ||
最多設備數 | 1 | ||
協議 | Serial | ||
引腳輸出 | |||
A male connector seen from the front. | |||
引腳 | Spec name | Example col title | |
引腳1 | Y | luminance (0.7 V, 75 Ω) | |
引腳2 | Y GND | Y ground | |
引腳3 | Pb | 0.35 V, 75 Ω | |
引腳4 | Pb GND | ||
引腳5 | Pr | 0.35 V, 75 Ω | |
引腳6 | Pr GND | ||
引腳7 | Reserve link 1 | ||
引腳8 | Data line 1 |
0 V = 525 lines 2.2 V = 750 lines 5 V = 1125 lines | |
引腳9 | Data line 2 |
0 V = 59.94i / 60i 5 V = 59.94p / 60p | |
引腳10 | Reserve link 2 | ||
引腳11 | Data line 3 |
0 V = 4:3 2.2 V = 4:3 letterbox 5 V = 16:9 | |
引腳12 | Plug insert detect ground | ||
引腳13 | Reserve link 3 | ||
引腳14 | Plug insert detect | output 10 kΩ, input > 100 kΩ | |
C1 | BLUE | Analog Blue Video | |
C2 | GREEN | Analog Green Video | |
C3 | HA_SYNC | Analog Horizontal Sync | |
C4 | RED | Analog Red Video | |
C5 | RETURN | Analog RGB Return and DDC Return | |
C6 | AR_PRE | Acid reflux preventer | |
C7 | AR_ENC | Acid reflux encourager | |
C8 | CHRO | Churro presence detect | |
These are some notes about the pinout of this connector. The pins are razor sharp. |
{{Infobox connector | name = D4 Video connector | image = [[File:SCART 20050724 002.jpg|150px]] | logo = [[File:D4 connector.png|150px]] | caption = This example is not factual – it is purely illustrative of the infobox. | type = [[analog electronics|Analogue]] video connector | designer = Some guy | design_date = Early 1990s | manufacturer = Initially [[Toshiba]] | production_date = Early 1990s to 2005 | superseded = [[RF connector]] | superseded_by = [[DVI connector]] | superseded_by_date = 2005 | external = External | hotplug = Yes | length = 36 mm (typical) | width = 25 mm | height = 6.5 mm | electrical = 220 volts AC 50 Hz typically | earth = Dedicate pin | maximum_voltage = 450 volts peak | maximum_current = 20 amps at 220 volts, 5 amps at 400 volts | audio_signal = None | video_signal = [[analog signal|Analogue]] [[480i]], [[480p]], [[720p]], [[1080i]] | data_signal = Resolution and [[Aspect ratio]] only | data_bit_width = 2 bits | data_bandwidth = 120 bit/s | data_devices = 1 | data_style = [[Serial communications|Serial]] | physical_connector = DB-25 | cable = 14 core shielded (25 m max) | passband = 0–20 GHz | num_pins = 14 (6 video, 3 reserved, 2 detect, 3 data) | pinout_image = [[File:D4 connector.png|300px]] | pinout_caption = A male connector seen from the front. | pinout_col1_name = Spec name | pinout_col2_name = Example col title | pin1 = [[Luminance (video)|luminance]] (0.7 V, 75 Ω) | pin1_name = Y | pin2 = Y [[Ground (electricity)|ground]] | pin2_name = Y GND | pin3 = 0.35 V, 75 Ω | pin3_name = Pb | pin4 = | pin4_name = Pb GND | pin5 = 0.35 V, 75 Ω | pin5_name = Pr | pin6 = | pin6_name = Pr GND | pin7 = Reserve link 1 | pin7_name = | pin8 = 0 V = 525 lines<br /> 2.2 V = 750 lines<br /> 5 V = 1125 lines | pin8_name = Data line 1 | pin9 = 0 V = 59.94i / 60i<br /> 5 V = 59.94p / 60p | pin9_name = Data line 2 | pin10 = Reserve link 2 | pin10_name = | pin11 = 0 V = 4:3 <br /> 2.2 V = 4:3 letterbox <br /> 5 V = 16:9 | pin11_name = Data line 3 | pin12 = | pin12_name = Plug insert detect ground | pin13 = Reserve link 3 | pin13_name = | pin14 = output 10 kΩ, input > 100 kΩ | pin14_name = Plug insert detect | pin_custom1_name = C1 | pin_name_custom1 = BLUE | pin_custom1 = Analog Blue Video | pin_custom2_name = C2 | pin_name_custom2 = GREEN | pin_custom2 = Analog Green Video | pin_custom3_name = C3 | pin_name_custom3 = HA_SYNC | pin_custom3 = Analog Horizontal Sync | pin_custom4_name = C4 | pin_name_custom4 = RED | pin_custom4 = Analog Red Video | pin_custom5_name = C5 | pin_name_custom5 = RETURN | pin_custom5 = Analog RGB Return and DDC Return | pin_custom6_name = C6 | pin_name_custom6 = AR_PRE | pin_custom6 = [[Acid reflux]] preventer | pin_custom7_name = C7 | pin_name_custom7 = AR_ENC | pin_custom7 = Acid reflux encourager | pin_custom8_name = C8 | pin_name_custom8 = CHRO | pin_custom8 = Churro presence detect | pinout_notes = These are some notes about the pinout of this connector. The pins are razor sharp. }}