跳转到内容

File:Chandrayaan-3 Propulsion Module.webp

页面内容不支持其他语言。
这个文件来自维基共享资源
维基百科,自由的百科全书

Chandrayaan-3_Propulsion_Module.webp (690 × 422像素,文件大小:16 KB,MIME类型:image/webp


摘要

描述
English: Chandrayaan-3 is a follow-on mission to Chandrayaan-2 to demonstrate end-to-end capability in safe landing and roving on the lunar surface. It consists of Lander and Rover configuration. It will be launched by LVM3 from SDSC SHAR, Sriharikota. The propulsion module will carry the lander and rover configuration till 100 km lunar orbit. The propulsion module has Spectro-polarimetry of Habitable Planet Earth (SHAPE) payload to study the spectral and Polari metric measurements of Earth from the lunar orbit.

Lander payloads: Chandra’s Surface Thermophysical Experiment (ChaSTE) to measure the thermal conductivity and temperature; Instrument for Lunar Seismic Activity (ILSA) for measuring the seismicity around the landing site; Langmuir Probe (LP) to estimate the plasma density and its variations. A passive Laser Retroreflector Array from NASA is accommodated for lunar laser ranging studies.

Rover payloads: Alpha Particle X-ray Spectrometer (APXS) and Laser Induced Breakdown Spectroscope (LIBS) for deriving the elemental composition in the vicinity of landing site.

Chandrayaan-3 consists of an indigenous Lander module (LM), Propulsion module (PM) and a Rover with an objective of developing and demonstrating new technologies required for Inter planetary missions. The Lander will have the capability to soft land at a specified lunar site and deploy the Rover which will carry out in-situ chemical analysis of the lunar surface during the course of its mobility. The Lander and the Rover have scientific payloads to carry out experiments on the lunar surface. The main function of PM is to carry the LM from launch vehicle injection till final lunar 100 km circular polar orbit and separate the LM from PM. Apart from this, the Propulsion Module also has one scientific payload as a value addition which will be operated post separation of Lander Module. The launcher identified for Chandrayaan-3 is GSLV-Mk3 which will place the integrated module in an Elliptic Parking Orbit (EPO) of size ~170 x 36500 km.

The mission objectives of Chandrayaan-3 are:

To demonstrate Safe and Soft Landing on Lunar Surface To demonstrate Rover roving on the moon and To conduct in-situ scientific experiments. To achieve the mission objectives, several advanced technologies are present in Lander such as,

Altimeters: Laser & RF based Altimeters Velocimeters: Laser Doppler Velocimeter & Lander Horizontal Velocity Camera Inertial Measurement: Laser Gyro based Inertial referencing and Accelerometer package Propulsion System: 800N Throttleable Liquid Engines, 58N attitude thrusters & Throttleable Engine Control Electronics Navigation, Guidance & Control (NGC): Powered Descent Trajectory design and associate software elements Hazard Detection and Avoidance: Lander Hazard Detection & Avoidance Camera and Processing Algorithm Landing Leg Mechanism. To demonstrate the above said advanced technologies in earth condition, several Lander special tests have been planned and carried out successfully viz.

Integrated Cold Test - For the demonstration of Integrated Sensors & Navigation performance test using helicopter as test platform Integrated Hot test – For the demonstration of closed loop performance test with sensors, actuators and NGC using Tower crane as test platform Lander Leg mechanism performance test on a lunar simulant test bed simulating different touch down conditions. The overall specifications for Chandrayaan-3 is provided below:

Sl No. Parameter Specifications 1. Mission Life (Lander & Rover) One lunar day (~14 Earth days) 2. Landing Site (Prime) 4 km x 2.4 km 69.367621 S, 32.348126 E 3. Science Payloads Lander: Radio Anatomy of Moon Bound Hypersensitive ionosphere and Atmosphere (RAMBHA) Chandra’s Surface Thermo physical Experiment (ChaSTE) Instrument for Lunar Seismic Activity (ILSA) Laser Retroreflector Array (LRA) Rover: Alpha Particle X-Ray Spectrometer (APXS) Laser Induced Breakdown Spectroscope (LIBS) Propulsion Module: Spectro-polarimetry of HAbitable Planet Earth (SHAPE) 4. Two Module Configuration Propulsion Module (Carries Lander from launch injection to Lunar orbit) Lander Module (Rover is accommodated inside the Lander) 5. Mass Propulsion Module: 2148 kg Lander Module: 1752 kg including Rover of 26 kg Total: 3900 kg 6. Power generation Propulsion Module: 758 W Lander Module: 738W, WS with Bias Rover: 50W 7. Communication Propulsion Module: Communicates with IDSN Lander Module: Communicates with IDSN and Rover. Chandrayaan-2 Orbiter is also planned for contingency link. Rover: Communicates only with Lander. 8. Lander Sensors Laser Inertial Referencing and Accelerometer Package (LIRAP) Ka-Band Altimeter (KaRA) Lander Position Detection Camera (LPDC) LHDAC (Lander Hazard Detection & Avoidance Camera) Laser Altimeter (LASA) Laser Doppler Velocimeter (LDV) Lander Horizontal Velocity Camera (LHVC) Micro Star sensor Inclinometer & Touchdown sensors 9. Lander Actuators Reaction wheels – 4 nos (10 Nms & 0.1 Nm) 10. Lander Propulsion System Bi-Propellant Propulsion System (MMH + MON3), 4 nos. of 800 N Throttleable engines & 8 nos. of 58 N; Throttleable Engine Control Electronics 11. Lander Mechanisms Lander leg Rover Ramp (Primary & Secondary) Rover ILSA, Rambha & Chaste Payloads Umbilical connector Protection Mechanism, X- Band Antenna 12. Lander Touchdown specifications Vertical velocity: ≤ 2 m / sec Horizontal velocity: ≤ 0.5 m / sec Slope: ≤ 120 The objectives of scientific payloads planned on Chandrayaan-3 Lander Module and Rover are provided below:

Sl. No Lander Payloads Objectives 1. Radio Anatomy of Moon Bound Hypersensitive ionosphere and Atmosphere (RAMBHA) Langmuir probe (LP) To measure the near surface plasma (ions and electrons) density and its changes with time 2. Chandra’s Surface Thermo physical Experiment (ChaSTE) To carry out the measurements of thermal properties of lunar surface near polar region. 3. Instrument for Lunar Seismic Activity (ILSA) To measure seismicity around the landing site and delineating the structure of the lunar crust and mantle. 4. LASER Retroreflector Array (LRA) It is a passive experiment to understand the dynamics of Moon system. Sl. No Rover Payloads Objectives 1. LASER Induced Breakdown Spectroscope (LIBS) Qualitative and quantitative elemental analysis & To derive the chemical Composition and infer mineralogical composition to further our understanding of Lunar-surface. 2. Alpha Particle X-ray Spectrometer (APXS) To determine the elemental composition (Mg, Al, Si, K, Ca,Ti, Fe) of Lunar soil and rocks around the lunar landing site. Sl. No Propulsion Module Payload Objectives

1. Spectro-polarimetry of HAbitable Planet Earth (SHAPE) Future discoveries of smaller planets in reflected light would allow us to probe into variety of Exo-planets which would qualify for habitability (or for presence of life).
日期
来源 https://www.isro.gov.in/Chandrayaan3_New.html
作者 Indian Space Research Organisation

许可协议

本文件是印度政府的版权作品,根据政府开放数据许可证 - 印度条款授权。
授权方式及范围
根据印度政府的国家数据共享和可访问性政策适用于所有以数字或模拟形式提供但使用公共资金生成的可共享非敏感数据,印度政府的各个机构,所有用户都获得了全球范围内的、免版税的、非排他性的许可,以使用、改编、发布(以原始形式或改编和/或衍生形式),翻译、展示、增值和创造衍生作品(包括产品和服务),用于所有合法的商业和非商业目的,以及对数据或信息的此类权利存在的持续时间。
相关事项说明:
用户必须通过明确发布归属声明来确认数据的提供者、来源和许可,包括DOI(数字对象标识符)或URL(统一资源定位符)或URI(统一资源标识符)相关数据。
用户不得以任何方式表明或暗示数据提供者认可他们的使用和/或用户。
数据提供者不对任何错误或遗漏负责,并且在任何情况下都不对因使用其造成的任何损失、伤害或损害负责。
数据提供者不保证数据的更新或最新版本的持续供应,并且在未提供更新数据的持续供应的情况下不承担任何责任。
豁免:许可证不包括以下类型的数据:一、个人信息;二、不可共享和/或敏感的数据;三、数据提供者的名称、徽章、标志和其他官方符号;四、受其他知识产权保护的数据,包括专利、商标和官方标记;五、军徽;六、身份证件;七、根据2005年信息权法第8节规定的理由不应公开披露的任何数据。

署名: Indian Space Research Organisation (GODL-India)

বাংলা  Deutsch  English  español  français  हिन्दी  日本語  മലയാളം  मराठी  русский  中文  中文(简体)  中文(繁體)  中文(臺灣)  +/−

此图片最初发布于the source indicated above,尚未经过管理员或审阅者的审核以确认上述内容许可证有效。请参阅“GOLD-India的未经审查的照片”以获取进一步说明。

说明

添加一行文字以描述该文件所表现的内容
Chandrayaan-3 and Chandrayaan-2 to demonstrate end-to-end capability in safe landing and roving on the lunar surface. It consists of Lander and Rover configuration.

此文件中描述的项目

描绘内容

媒体类型 简体中文(已转写)

image/webp

校验和 简体中文(已转写)

192d27aa95d80c543bdeaa31f5ad763cf6cb241e

断定方法:​SHA-1 简体中文(已转写)

数据大小 简体中文(已转写)

16,124 字节

422 像素

690 像素

文件历史

点击某个日期/时间查看对应时刻的文件。

日期/时间缩⁠略⁠图大小用户备注
当前2023年2月6日 (一) 14:282023年2月6日 (一) 14:28版本的缩略图690 × 422(16 KB)ChinakpradhanUploaded a work by Indian Space Research Organisation from https://www.isro.gov.in/Chandrayaan3_New.html with UploadWizard

以下页面使用本文件:

全域文件用途

以下其他wiki使用此文件: