跳至內容

File:Chandrayaan-3 Propulsion Module.webp

頁面內容不支援其他語言。
這個檔案來自維基共享資源
維基百科,自由的百科全書

Chandrayaan-3_Propulsion_Module.webp (690 × 422 像素,檔案大小:16 KB,MIME 類型:image/webp


摘要

描述
English: Chandrayaan-3 is a follow-on mission to Chandrayaan-2 to demonstrate end-to-end capability in safe landing and roving on the lunar surface. It consists of Lander and Rover configuration. It will be launched by LVM3 from SDSC SHAR, Sriharikota. The propulsion module will carry the lander and rover configuration till 100 km lunar orbit. The propulsion module has Spectro-polarimetry of Habitable Planet Earth (SHAPE) payload to study the spectral and Polari metric measurements of Earth from the lunar orbit.

Lander payloads: Chandra’s Surface Thermophysical Experiment (ChaSTE) to measure the thermal conductivity and temperature; Instrument for Lunar Seismic Activity (ILSA) for measuring the seismicity around the landing site; Langmuir Probe (LP) to estimate the plasma density and its variations. A passive Laser Retroreflector Array from NASA is accommodated for lunar laser ranging studies.

Rover payloads: Alpha Particle X-ray Spectrometer (APXS) and Laser Induced Breakdown Spectroscope (LIBS) for deriving the elemental composition in the vicinity of landing site.

Chandrayaan-3 consists of an indigenous Lander module (LM), Propulsion module (PM) and a Rover with an objective of developing and demonstrating new technologies required for Inter planetary missions. The Lander will have the capability to soft land at a specified lunar site and deploy the Rover which will carry out in-situ chemical analysis of the lunar surface during the course of its mobility. The Lander and the Rover have scientific payloads to carry out experiments on the lunar surface. The main function of PM is to carry the LM from launch vehicle injection till final lunar 100 km circular polar orbit and separate the LM from PM. Apart from this, the Propulsion Module also has one scientific payload as a value addition which will be operated post separation of Lander Module. The launcher identified for Chandrayaan-3 is GSLV-Mk3 which will place the integrated module in an Elliptic Parking Orbit (EPO) of size ~170 x 36500 km.

The mission objectives of Chandrayaan-3 are:

To demonstrate Safe and Soft Landing on Lunar Surface To demonstrate Rover roving on the moon and To conduct in-situ scientific experiments. To achieve the mission objectives, several advanced technologies are present in Lander such as,

Altimeters: Laser & RF based Altimeters Velocimeters: Laser Doppler Velocimeter & Lander Horizontal Velocity Camera Inertial Measurement: Laser Gyro based Inertial referencing and Accelerometer package Propulsion System: 800N Throttleable Liquid Engines, 58N attitude thrusters & Throttleable Engine Control Electronics Navigation, Guidance & Control (NGC): Powered Descent Trajectory design and associate software elements Hazard Detection and Avoidance: Lander Hazard Detection & Avoidance Camera and Processing Algorithm Landing Leg Mechanism. To demonstrate the above said advanced technologies in earth condition, several Lander special tests have been planned and carried out successfully viz.

Integrated Cold Test - For the demonstration of Integrated Sensors & Navigation performance test using helicopter as test platform Integrated Hot test – For the demonstration of closed loop performance test with sensors, actuators and NGC using Tower crane as test platform Lander Leg mechanism performance test on a lunar simulant test bed simulating different touch down conditions. The overall specifications for Chandrayaan-3 is provided below:

Sl No. Parameter Specifications 1. Mission Life (Lander & Rover) One lunar day (~14 Earth days) 2. Landing Site (Prime) 4 km x 2.4 km 69.367621 S, 32.348126 E 3. Science Payloads Lander: Radio Anatomy of Moon Bound Hypersensitive ionosphere and Atmosphere (RAMBHA) Chandra’s Surface Thermo physical Experiment (ChaSTE) Instrument for Lunar Seismic Activity (ILSA) Laser Retroreflector Array (LRA) Rover: Alpha Particle X-Ray Spectrometer (APXS) Laser Induced Breakdown Spectroscope (LIBS) Propulsion Module: Spectro-polarimetry of HAbitable Planet Earth (SHAPE) 4. Two Module Configuration Propulsion Module (Carries Lander from launch injection to Lunar orbit) Lander Module (Rover is accommodated inside the Lander) 5. Mass Propulsion Module: 2148 kg Lander Module: 1752 kg including Rover of 26 kg Total: 3900 kg 6. Power generation Propulsion Module: 758 W Lander Module: 738W, WS with Bias Rover: 50W 7. Communication Propulsion Module: Communicates with IDSN Lander Module: Communicates with IDSN and Rover. Chandrayaan-2 Orbiter is also planned for contingency link. Rover: Communicates only with Lander. 8. Lander Sensors Laser Inertial Referencing and Accelerometer Package (LIRAP) Ka-Band Altimeter (KaRA) Lander Position Detection Camera (LPDC) LHDAC (Lander Hazard Detection & Avoidance Camera) Laser Altimeter (LASA) Laser Doppler Velocimeter (LDV) Lander Horizontal Velocity Camera (LHVC) Micro Star sensor Inclinometer & Touchdown sensors 9. Lander Actuators Reaction wheels – 4 nos (10 Nms & 0.1 Nm) 10. Lander Propulsion System Bi-Propellant Propulsion System (MMH + MON3), 4 nos. of 800 N Throttleable engines & 8 nos. of 58 N; Throttleable Engine Control Electronics 11. Lander Mechanisms Lander leg Rover Ramp (Primary & Secondary) Rover ILSA, Rambha & Chaste Payloads Umbilical connector Protection Mechanism, X- Band Antenna 12. Lander Touchdown specifications Vertical velocity: ≤ 2 m / sec Horizontal velocity: ≤ 0.5 m / sec Slope: ≤ 120 The objectives of scientific payloads planned on Chandrayaan-3 Lander Module and Rover are provided below:

Sl. No Lander Payloads Objectives 1. Radio Anatomy of Moon Bound Hypersensitive ionosphere and Atmosphere (RAMBHA) Langmuir probe (LP) To measure the near surface plasma (ions and electrons) density and its changes with time 2. Chandra’s Surface Thermo physical Experiment (ChaSTE) To carry out the measurements of thermal properties of lunar surface near polar region. 3. Instrument for Lunar Seismic Activity (ILSA) To measure seismicity around the landing site and delineating the structure of the lunar crust and mantle. 4. LASER Retroreflector Array (LRA) It is a passive experiment to understand the dynamics of Moon system. Sl. No Rover Payloads Objectives 1. LASER Induced Breakdown Spectroscope (LIBS) Qualitative and quantitative elemental analysis & To derive the chemical Composition and infer mineralogical composition to further our understanding of Lunar-surface. 2. Alpha Particle X-ray Spectrometer (APXS) To determine the elemental composition (Mg, Al, Si, K, Ca,Ti, Fe) of Lunar soil and rocks around the lunar landing site. Sl. No Propulsion Module Payload Objectives

1. Spectro-polarimetry of HAbitable Planet Earth (SHAPE) Future discoveries of smaller planets in reflected light would allow us to probe into variety of Exo-planets which would qualify for habitability (or for presence of life).
日期
來源 https://www.isro.gov.in/Chandrayaan3_New.html
作者 Indian Space Research Organisation

授權條款

本檔案是印度政府的版權作品,根據政府開放數據許可證 - 印度條款授權。
授權方式及範圍
根據印度政府的國家數據共享和可訪問性政策適用於所有以數字或模擬形式提供但使用公共資金生成的可共享非敏感數據,印度政府的各個機構,所有用戶都獲得了全球範圍內的、免版稅的、非排他性的許可,以使用、改編、發布(以原始形式或改編和/或衍生形式),翻譯、展示、增值和創造衍生作品(包括產品和服務),用於所有合法的商業和非商業目的,以及對數據或資訊的此類權利存在的持續時間。
相關事項說明:
用戶必須通過明確發布歸屬聲明來確認數據的提供者、來源和許可,包括DOI(數字對象標識符)或URL(統一資源定位符)或URI(統一資源標識符)相關數據。
用戶不得以任何方式表明或暗示數據提供者認可他們的使用和/或用戶。
數據提供者不對任何錯誤或遺漏負責,並且在任何情況下都不對因使用其造成的任何損失、傷害或損害負責。
數據提供者不保證數據的更新或最新版本的持續供應,並且在未提供更新數據的持續供應的情況下不承擔任何責任。
豁免:許可證不包括以下類型的數據:一、個人資訊;二、不可共享和/或敏感的數據;三、數據提供者的名稱、徽章、標誌和其他官方符號;四、受其他知識產權保護的數據,包括專利、商標和官方標記;五、軍徽;六、身份證件;七、根據2005年資訊權法第8節規定的理由不應公開披露的任何數據。

姓名標示: Indian Space Research Organisation (GODL-India)

বাংলা  Deutsch  English  español  français  हिन्दी  日本語  മലയാളം  मराठी  русский  中文  中文(简体)  中文(繁體)  中文(臺灣)  +/−

此圖片最初發布於the source indicated above,尚未經過管理員或審閱者的審核以確認上述內容許可證有效。請參閱「GOLD-India的未經審查的照片」以獲取進一步說明。

說明

添加單行說明來描述出檔案所代表的內容
Chandrayaan-3 and Chandrayaan-2 to demonstrate end-to-end capability in safe landing and roving on the lunar surface. It consists of Lander and Rover configuration.

在此檔案描寫的項目

描繪內容

多媒體型式 繁體中文 (已轉換拼寫)

image/webp

校驗和 繁體中文 (已轉換拼寫)

192d27aa95d80c543bdeaa31f5ad763cf6cb241e

斷定方法:​SHA-1 中文 (已轉換拼寫)

資料大小 Chinese (Hong Kong) (已轉換拼寫)

16,124 位元組

422 像素

690 像素

檔案歷史

點選日期/時間以檢視該時間的檔案版本。

日期/時間縮⁠圖尺寸用戶備⁠註
目前2023年2月6日 (一) 14:28於 2023年2月6日 (一) 14:28 版本的縮圖690 × 422(16 KB)ChinakpradhanUploaded a work by Indian Space Research Organisation from https://www.isro.gov.in/Chandrayaan3_New.html with UploadWizard

下列頁面有用到此檔案:

全域檔案使用狀況

以下其他 wiki 使用了這個檔案: